Open Jobs

Full-time structural welding projects located in and around Paducah, KY. Per diem ($100/day) for travelers 60+ miles from job site. Job Scope: Perform structural welding on carbon steel and occasional stainless Repair cracked welds, damaged framing, deck plating and structural members Install and replace bulkheads, stiffeners, brackets, frames and decking SMAW & Stick welding Hardwire flux core welding as required Interpret blueprints, shipyard drawings and work orders Perform horizontal, vertical and overhead welding positions Cut and fit material using torch and grinders Gouging and back-gouging as needed Work in confined spaces, inside hulls, tanks and tight compartments Maintain weld quality to meet shipyard and Coast Guard inspection standards Benefits: Tradesmen+ Rewards Program (points earned for hours worked) Vacation pay Health insurance 401(k) retirement savings plan

Duration: 12 months | Start: ASAP Job Description: Pipe Welders 1st Class perform welding procedures on stainless steel and copper-nickel piping systems in Pascagoula, MS. The role involves sealing the vital piping networks that supply ships with chemical, steam, ventilation, heating, and cooling systems. Pipe welders work in a 24-hour shipyard manufacturing setting including confined spaces, variable heights, multiple weather conditions, and rotating shifts. Perform pipe welding using GTAW (TIG) and SMAW (Stick) on stainless steel and copper-nickel pipe Work in the 6G restricted position for pipe welding production and tests Benefits: Medical, dental, and vision coverage Yearly bonus Weekly pay

SUBSTATION ELECTRICIAN - TEXAS MUST HAVE DMS BUS INSTALLATION EXPERIENCE. Location: Claude, TX | Schedule: 40 hours/week | Start: ASAP Job Scope: Install and assemble DMS bus systems in substations Work on high-voltage equipment Conduit, terminations, and equipment install Read one-lines and electrical prints Benefits: Overtime potential available Long-term work opportunity Health, dental, and vision insurance 401(k) retirement plan

Position: Industrial Electrician Location: 26 Iron Way, Weirton, WV 26062 Employment Type: Full-Time | Schedule: 60 hours per week Duration: Long-term (projected 1 year) Pay: Travelers: $30/hr + $100/day per diem | Local commuters: up to $36/hr Key Responsibilities: Assist with wire pulling and termination for anode furnace systems Install, maintain, and troubleshoot AC/DC power systems Bend and install EMT and rigid conduit Interpret and work from electrical schematics, blueprints, and technical drawings Execute installation of electrical systems and equipment in accordance with project specifications Ensure compliance with all applicable safety regulations and quality standards Benefits: Guaranteed weekly overtime Medical and dental insurance Paid holidays and vacation

Millwright Superintendent (Traveling) Lincoln, NE. Per diem and hotel provided for projects requiring overnight stay outside of Lincoln, NE. What You'll Do: Lead daily field operations for millwright crews on active job sites Plan and coordinate manpower, schedules, and work sequencing Enforce safety standards, conduct inspections, and lead jobsite safety meetings Read and interpret drawings, layouts, and project plans Coordinate with project managers, engineers, and leadership Track labor hours, equipment use, and material needs Solve field issues quickly to keep projects on schedule Travel approximately 50% (overnight travel includes per diem) Benefits: Health, dental, and vision insurance Paid time off and paid company holidays 401(k) with company match Long-term growth and leadership advancement opportunities

Travel Pipefitters/Welders — North Carolina & South Carolina Projects Experienced Pipefitters and Welders needed for commercial construction and data center projects across North Carolina and South Carolina. 50 hours/week with consistent overtime opportunities and long-term project work on carbon and stainless pipe systems. What You'll Be Doing Install and weld carbon and stainless pipe systems Support commercial and data center construction projects Read blueprints and piping layouts Work with mechanical and MEP teams onsite Travel to regional project sites

Shop Welder Shop welders needed for a 2-month job in Reading, PA. Shifts start at 5:00 AM, 10 hours/day, 50 hours/week. Per diem paid for 7 days if Saturday is worked (Saturday not required). Key Responsibilities Weld bridge components using FCAW, GMAW/MIG, SAW, and SMAW in accordance with AWS D1.1 Interpret weld symbols, WPSs, and shop drawings Perform weld prep, grinding, gouging, and cleanup as required Work safely with overhead cranes, fixtures, and heavy plate assemblies Maintain compliance with AISC, AWS, and OSHA safety standards

Certified Riggers needed for a project in Mesquite, TX. Monday–Friday, 50+ hours/week. Per diem paid 7 days/week. Primary Responsibilities Working under RT's or crawlers, rigging up modules that weigh between 80k–110k lbs Staging the laydown area for storage Operating gantry cranes, versa lifts, forklifts, telehandlers, and scissor lifts Pulling material off of lowboy flatbed trucks and loading trucks for last mile hauling

Pipefitters needed in Apple Grove, WV. 3–4 month project, 60 hours/week. Pipefitter Job Responsibilities Select the type and size of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications Inspect the worksite to determine the presence of obstructions Plan sequence of installation to avoid obstructions and activities of other workers Cut pipe using a reciprocating saw, pipe cutter, cutting torch and pipe cutting machine, and/or other small hand tools Thread pipe using a threading machine Bend pipe by hand or with pipe-bending tools and machines Mount pipe hangers and brackets on walls and ceiling to hold the pipe Assemble and install a variety of metal or nonmetal pipes and pipe fittings Secure pipes to structure with brackets, clamps, and hangers, using hand and power tools Perform minor maintenance and cleaning of tools and equipment Observe and comply with all safety and project rules and all company policies and procedures Perform other duties as required Benefits Company-subsidized health insurance 401(k) plan with employer match Paid vacation and paid holidays Continuing education opportunities

Journeyman Electricians needed in Stockton, CA. Running EMT.60 hrs/wk for 2 months.Hotel provided.

Job Description:As a Stick Welder at a barge repair facility in Channelview, TX, your primary role will involve proficiently using 5/32 6011 SMAW and 1/8" 7018 SMAW electrodes. You will be required to perform vertical up and overhead welding tasks to repair and maintain barges in the facility.Responsibilities:Weld using 5/32 6011 SMAW and 1/8" 7018 SMAW electrodes on barge repair projects.Perform vertical up and overhead welding techniques as necessary.Repair and maintain barge structures to meet operational requirements.Ensure the integrity and quality of welds are in accordance with safety and industry standards.

Ceramic Tile Installers needed for a 4–8 week job in Globe, AZ. Start date: June 1, 2026.Working 50-hour weeks, Monday through Friday.Duties: Pouring mud pans and installing tile for showers in a commercial facility.

This is a high-skill welding role requiring confidence and proven ability with 5/32" 6011 and 1/8" 7018 electrodes. Candidates must be able to pass a practical weld test and be ready to work in a demanding marine repair environment.Job Description:As a Stick Welder specializing in barge repair on the Mississippi River waterfront in Hartford, IL, you will be responsible for performing welding operations using 5/32" 6011 rod and 5/32" 7018 rod to pass vertical up and overhead lap welds on 3/8" plate.Your primary tasks will include executing precise and consistent welds, adhering to quality standards, and ensuring weld continuity and consistency on barge repair projects.Successful candidates must demonstrate proficiency in welding techniques, including vertical up and overhead lap welds, while meeting visual inspection criteria for weld quality, continuity, and consistency.Working collaboratively with a team of welders, fabricators, and repair specialists, you will contribute to the structural integrity and functionality of barges on the Mississippi River waterfront.This role demands attention to detail, adherence to welding standards, and the ability to produce high-quality welds with no undercut to ensure the durability and safety of repaired barges.

Job Description:We are seeking experienced Structural Welders to join our shipyard team in Houston, TX. This role involves welding structural components using .045 fluxcore with 100% CO2 gas in vertical up and overhead positions.Responsibilities:Weld structural components using .045 fluxcore with 100% CO2 gas.Perform welding in vertical up and overhead positions to meet shipyard requirements.Adhere to shipyard welding standards and safety protocols.Collaborate with team members and supervisors to ensure welding tasks are completed as per specifications.

Job Summary:The Safety Training Specialist at Mullins Mechanical is responsible for administering Safety Training at the jobsite level. They ensure all employees are onboarded per the standard operating process and facilitate the expectations of the required Safety Programs and required Annual Safety Trainings. The overall goal of the safety training specialist is to protect Mullins’ interests, support employees and on-site supervision helping them successfully complete a quality project safely with zero incidents, while promoting and enhancing client relationships and the company core values.Reporting Structure:Reports to the Corporate Safety Trainer.Essential Duties & Responsibilities:Support and promote Mullins’ safety culture at the job-site levelUse discretion, independent judgement, and professional skills to plan and implement safety training from the corporate training program that applies to each jobsites scope and needsCoordinate onboarding efforts with Human Resources and the Recruiting DepartmentCollaborate with the Project Management team to schedule and conduct safety training as needed, the use of on-site safety coordinators may be needed or required at times and should be coordinated with the Project Managers and Corporate Safety TrainerSubmit Monthly & Quarterly Reports to the Corporate Safety TrainerHave full capabilities to train on higher level training courses:Mobile Elevated Working Platform (MEWP)Telehandler/Forklift (TELE)First-Aid/CPR/AEDConfined SpaceLockout/Tagout (LOTO)Heavy EquipmentScaffold CompetencyFall ProtectionLadder SafetyMake recommendations to improve processes and procedures and look for ways to continuously improve Mullins’ Safety Training Program and related policies and proceduresMaintain a culture and working environment where safety and its required training is planned in every taskMaintain detailed training files and recordsEnsure PPE requirements are met by all employees on-site through proper training and culture building strategies.Build proficiency within Procore, Schoox, Excel, Word, Outlook, PowerPoint, etc.Duties outside of what is listed here may be required. This position will require travel to site and extended periods of travel based off training needs for each project.

New construction commercial building installation in Topeka, KS. Project duration: 3+ months.Scope of Work:Install new EMT conduit (1/2" to 2" diameter)Install new light fixturesInstall new panel boxesSchedule: 40 hours/week, Sunday–Thursday, 5×8-hour shifts

This role involves working on the final phase of a commercial access control installation, focusing on door hardware finishing, adjustments, and system completion in an active construction environment.Job Duties:Cut strikes on commercial door frames (including filled frames)Install and adjust magnetic locks and related hardwareComplete final device connections to bring systems onlineAdditional Opportunity:Technicians willing to travel may be considered for an upcoming longer-term project in Minnesota following completion of the Houston assignment.

Trillium Construction is hiring Turbine Millwrights for a 7-day shutdown in Oceanside, NY.Job Responsibilities:Perform mechanical reassembly of industrial steam or gas turbines (no precision work required)Perform basic mechanical tasks and assist where neededManual labor expected; must be a team playerCompensation Notes:Overtime given after 8 hours and on weekendsTravel pay provided for travel in and out of site

We are seeking an experienced Lift Director to oversee and coordinate all critical lifting and rigging operations on a $5 billion steel plant in Alabama. This role is responsible for planning, directing, and ensuring the safe execution of crane and heavy lift activities in compliance with site safety standards, engineered lift plans, and company procedures. Project duration: 3 months.Responsibilities:Develop and review lift plans for critical and complex crane operationsCoordinate crane activities with project management, field supervision, and subcontractorsEnsure all lifting operations comply with OSHA, site, and company safety requirementsConduct pre-lift meetings and hazard assessmentsVerify crane capacities, rigging configurations, and load calculationsMonitor lift operations to ensure safe execution and proper communication among crewsInspect lifting equipment, rigging gear, and crane documentationStop work when unsafe conditions or practices are identified

Tradesmen International is immediately hiring experienced Marine Shipfitters for a project in Newport News, VA. Full-time opportunity at up to $45/hour plus $140/day per diem for travelers 75+ miles from the job site.Job Scope:Multi-pass tack weldingAir Carbon Arc GougingOperating burning-oxygen/propane and heating-oxygen/propane torchesReading and comprehending complex structural assembly drawings, blueprints, and sketchesLaying out piece parts for fabrication and assemblyAssembling structural piece parts in accordance with specificationsUsing vibratory tools, grinders, and needle gunsWorking from packages and drawings to plan and execute workErecting, setting, and making up complex-shaped shell plates and deck bulkheadsInstalling and replacing hull inserts and penetrationsInstalling miscellaneous and complex foundations

NOW HIRING: Kentucky Licensed Electricians for commercial and industrial projects in Henderson, KY. Steady work through the summer with overtime available. Competitive pay at $40/hour plus $140/day per diem. Long-term opportunity with consistent hours for dependable licensed electricians ready to work immediately.

Industrial safety technician assignment in De Soto supporting inspections, audits, accident investigations, training, risk mitigation, and regulatory compliance.

Experienced Boilermaker needed for a project in Columbus, GA with a strong background in fabrication, assembly, maintenance, and repair of steam-generating boilers and associated boiler tube systems. The ideal candidate will have hands-on expertise working with high-pressure boilers, tube rolling, welding, and boiler inspections, ensuring safe and efficient plant operations.Job Responsibilities:Assemble, install, maintain, and repair steam-generating boilers, pressure vessels, tanks, and related equipmentRead and interpret blueprints, engineering drawings, and technical manualsLay out, position, align, and secure components prior to assemblyCut, shape, and fit metal components to construct and repair boiler tubes, drums, and headersPerform tube removal and tube replacement in boilersUse torches, welding equipment, and cutting tools for fabrication and repairMaintain accurate records of inspections, repairs, and work performedInspect boiler systems for cracks, leaks, corrosion, and other defectsConduct hydrostatic and pressure testing on repaired and newly installed systemsPreheat if necessary using hand torch or heating furnaceWork in flat, horizontal, vertical, or overhead positionsWork in confined spaces and at heights using a sky climberAdhere to OSHA, ASME, and company safety standardsCollaborate with engineers, supervisors, and other skilled trades to complete projects efficientlyRespiratory protection is common and may be requiredOther duties as assigned

Lay out, fit, and weld fabricated, cast, and forged components to assemble structural forms in Columbus, GA. Work will be completed in a safe and timely manner with the highest quality possible.Job Responsibilities:Lay out, position, align, and secure parts and assemblies prior to assemblyExamine work pieces for defects and measure to ensure conformance with specificationsWeld together metal components of piping systems, plate, pipe, and tube or structural shapes using electric arc-welding equipment per blueprints, diagrams, work orders, welding procedures, or oral instructionsConnect cables and adjust welding unit for amperage, voltage, polarity, and pulse as specifiedStrike arc to melt and deposit metal from electrode to work piece and join edgesManually guide electrode or gun along weld-line maintaining proper arc length, speed, depth of fusion, and bead qualityWeld in flat, horizontal, vertical, or overhead positionsExamine welds for bead size and specification conformanceMay clean or degrease weld joints using wire brush, portable grinder, or chemical bathMay remove excess weld, slag, and spatter using carbon arc gouge, hand scraper, grinder, or power chipperMay preheat work pieces using hand torch or heating furnaceMay tack weld assemblies together and cut metal plates or structural shapesMay fit up parts and inspect fit before weldingMay use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded-Metal Arc welding processesRespiratory protection is common and may be requiredOther duties as assigned

Experienced Electrical Foreman for an active data center project in Cedar Rapids. Lead crews on EMT conduit installation, cable tray, terminations, underground and rough-in work, and daily coordination to keep production, safety, and quality on site.